SS-OM-V01 High-Speed Fiber Modem

  Introduction & Characters

  SS-OM-V01 High-Speed Fiber Modem is used to achieve direct modulation of one N×64K V.35 data signal to mono-mode or multimode fibers. It provides multiple clock working modes as options and owns strong loop back testing function. It features its unique advantages for single channel data transmission as used by modem. One V.35 straight-through cable is available in the fittings attached with this product and DB25M can be converted into DV34F, to be directly connected with DTE device. When equipment needs to be connected with DCE device, it can be in a tail-to-tail connecting structure through crossover wire.

•         Large-scale FPGA circuit is adopted for hardware circuit, so that the reliability of entire equipment is enhanced, on a small volume

•         Provides V.35 data interface

•         Automatic Gain Control (AGC) circuit is adopted to adapt to transmission of different distances.

•         Digital Lock Loop (DLL) is used to minimize jitter when data and clock are recovered from optical signals.

•         Built-in loop testing function complies with V.54 standard, with bit error rate tester self carried.

•         Flexible speed selection of communication data: N×64kbps, the max. speed reaching 2M.

  Specifications

  Electrical

 User Type:           V.35/V.24

 Interface Bit Rate     N×64K（N=1~32）

 Clock               Master/Slave Clock Optional

 Interface Mode       V.35 / DCE

 Electrical Property    ITU-T V.35 Recommended Standard Balance

 Terminal Std         In Compliance with ISO2593 Prescription

 Optical

 Line Bit Rate              2.048Mbit/s

 Line Code Type           1B1H

 Optical Source            LD

 Output Power             ≥－9dBm

 Receiver Type             PINFET

 Receiver Sensitivity        ≤－40dBm（BER≤10^-11）

 Type of Optical Connector  FC / SC

 Focus Wavelength         1310/1550 nm

 Operating Environment

 Input Voltage             Optional

 Power Consumption       ≤5W

 Operating Temperature    －5℃～50℃

 Storage Temperature      －40℃～+70℃

 Relative Humidity         10%～90% Non-condensed

 Free from corrosive and solvent gases, flying dust, and interference of strong magnetic field.

 Structure & Dimensions

 Standalone Délicate Type （19″/2）:

 Exterior Dimension       200mm(W)×43.5mm(H)×150mm(D)

 Weight                  1.0 kg

 Rack Type               EIA 19" Rack

 Chassis Type （19″）(Integrated plug-in card 12-slot 19″rack and chassis):

 Exterior Dimensions      483mm(W)×266mm(H)×225mm(D)

 Weight                  12 kg (Fully Configured)

 Rack Type               EIA 19" Rack