SS-OM-O4E 4E1 PDH Optical Multiplexer

  Introduction & Characters

  SS-OM-O4E PDH Optical Multiplexer is a NG product after optimized design of original secondary group optical multiplexer. It is provided with 4XE1 transmission capacity, with satisfactory alarm and network management function, as well as interface with Xview NM software. The product is ingenious and practical, improved in various design performances, stable and reliable, nice in appearance and handy, economical, as a new generation of transmission product with good performance of transmission and high performance and value ratio. The product provides local/remote equipment working status and alarm display, with system error code ≥10-3 or ≥10-6 indication, able for controlling status and alarm display content of optical multiplexer, 2M bypass alarm mask code, and achieve local/remote bypass loop-back through network management software, which has greatly enhance the system performance and monitoring ability for a centralized network management.

•         Highly integrated hardware circuit, small in volume of entire equipment

•         Provided with network management port, to provide a satisfactory solution for operation provider’s centralized management of massive optical devices

•         Digital clock restore circuit and digital smooth phase lock circuit are adopted for 2.048Mbit/s.

•         Available with self-contained centralized monitoring function and acoustic-optic alarm function

•         With strong anti-interference ability, stable and reliable in operation, easy for installation and maintenance.

  Specifications

  Electrical

Interface Bit Rate :            2.048Mbit/s±50ppm

Max Transmission Rate:       16.896Mbit/s

Transmission Capacity:        120 Channels

Impedance:                  75Ω Unbalance/120ΩBalanced

Interface Code Type:           HDB3

Jitter Character In compliance with G.742 and G.823 Recommendations

  Optical

Line Bit Rate:                16.896 Mbit/s

Line Code Type:              1B1H

Optical Source:               LD

Power Output:                ≥－9dBm

Receiver Type:                PINFET

Receiver Sensitivity:           ≤－40dBm（BER≤10-11）

Type of Optical Connector:      FC / SC

Focus Wavelength:            1310/1550 nm

  Operating Environment

Input Voltage:             Optional

Power Consumption:         ≤5W

Operating Temperature:     －5℃～+50℃

Storage Temperature:       －40℃～+70℃

Relative Humidity:          10%～90% Non-condensed

Free from corrosive and solvent gases, flying dust, and interference of strong magnetic field

  Structure & Dimensions

Standalone Delicate Type (19″/2):

Exterior Dimensions:          200mm(W)×43.5mm(H)×150mm(D)

Weight:                      1.0 kg

Rack Type:                   EIA 19" Rack

Standalone Type (19″)

Exterior Dimensions:          440mm(W)×43.5mm(H)×150mm(D)

      Weight:                      1.2 kg

Rack Type:                   EIA 19" Rack