SS-OM-16 16E1 Standard Optical Multiplexer

 Introduction &Characters

 SS-OM-16 16E1 Optical Multiplexer refers to design of highly integrated structure and provides 16 standard E1 interfaces together with one channel of order wire, with self-contained alarm and NM functions, as well as self-testing and E1 loop-back testing functions. Alarm signals are provided in a full range, including LOS, LOF, 10^-3 error code, and 10^-6 error alarms of line side as well as LOS and HDB3 coding violation alarms of E1 bypass, and available with sound alarming signals. All performances have been satisfactorily designed, so that it has become a steady and reliable NG transmission product, nice in appearance and delicate, economical and practical, with good transmission performance. Transmission impedance can be matched through simple contact pin and patch cord or DIP switch setting, and at the same time different adapters can be selected to adapt to different transmission interfaces. The product can be applied to construct economical and flexible multi-service transmission networks, used for relay between switch offices, data transmission for LAN, 2M access of lease service for key clients, voice cutover for residential areas/intelligent buildings, and connection of base stations and other various digital transmission networks. 

•         Highly integrated hardware circuit, small in volume of entire equipment

•         Provided with NM port, to provide the operation providers with a satisfactory solution to centralized management of massive optical multiplexing devices.

•         Digital clock restore circuit and digital smooth phase lock circuit are adopted for 2.048Mbit/s port.

•         Available with self-contained centralized monitoring function and acoustic-optic alarm function

•         Strong anti-interference ability, stable and reliable for operation, as well as easy for installation and maintenance

  Specifications

            Electrical

Interface Bit Rate          2.048Mbit/s±50ppm

Max. Transmission Rate    100Mbit/s

Transmission Capacity      480 Channels

Impedance                75Ω Unbalancee/120Ω Balanced

Interface Code Type        HDB3

Jitter Character       In Compliance with G.742 and G.823 Recommendations

Optical

Line Bit Rate              100 Mbit/s

Line Code Type            4B5B

Optical Source             LD

Output Power              ≥－9dBm

Receiver Type             PINFET

Receiver Sensitivity        ≤－38dBm（BER≤10^-10）

Type of Optical Connector   FC / SC

Focus Wavelength         1310/1550 nm

  Operating Environment

Input Voltage              Optional

Power Consumption        ≤5W

Operating Temperature     －5℃～50℃

Storage Temperature       －40℃～+70℃

Relative Humidity          10%～90% Non-condensed

Free from corrosive and solvent gases, flying dust, and interference of strong magnetic field.

  Structure & Dimensions

Standalone Type （19″）:

Exterior Dimensions       440mm(W)×43.5mm(H)×150mm(D)

Weight                  1.2 kg

Rack Type               EIA 19" Rack

Chassis Type (19″):

Exterior Dimensions      483mm(W)×266mm(H)×225mm(D)

        Weight                  12 kg (Fully Configured)

Rack Type               EIA 19" Rack