SS-IC-220   FE1/10Base-T Interface Converter

  Introduction & Characters

SS-IC-220 FE1/10Base-T interface converter fulfills the electrical conversion for 10Base-T Ethernet interface and G.703/FE1 interface. It can automatically learn the MAC addresses in the linked LAN continuously, and transmit the aim address to frame in another LAN. There are up to 10,000 addresses in its LAN sheet, which can be updated automatically. The maximum rate of transmitting and filtrating is 30,000 frame/second (line speed), with the buffer capable to contain 256 frames and waiting throughput 1 frame. When applied as an extender or sectionalizer, the bridge has two working status, filtering and not filtering, so as to determine whether all the traffics are allowed to transmit on the WAN. Specified time slot can be extracted from G.703 E1 at discretion to compose the data channel for N*64K (N=0~31).

●      Conversion of 10Base-T Ethernet interface into E1 interface

●      Code rate:               N*64K (N=0~31)

●      Clock:                      master/slave

●      E1 interface impedance:      75Ω or 120Ω, optional

●      Power supply:         AC~220V / DC-48V (optional)

Technical Specifications

E1 interface

2M ports:                 G.703 and G.704 of ITU-T

Code type:                  HDB3

Code rate:            N × 64K (N=0~31)

E1 interface:                    Unbalanced               75Ω/BNC

                                     Balanced                120Ω/RJ45

Ethernet interface

User type:                                   10 Base-T

Port standard:    Acc. to IEEE802.3 10Base-T/FL

Bit rate:                               2048 kbit/s

Working conditions

Supply voltage                             Optional

Power consumption                 ≤5W

Operating temperature               -5℃ ~ 50℃

Storing temperature                 -40℃ ~ +70℃

Relative humidity                         10%～90% none condensing

No corrosive and solvent Gas, no flying dust and intense magnetic-field interference

Physical

Standalone (19″/2):

Dimensions:                            200mm (W) × 43.5mm (H) × 150mm (D)

Weight:                                     0.8 kg

Rack type:                                EIA 19”

Rack Mount (19″):

Dimensions:                            483mm (W) × 226mm (H) × 225mm (D)

Weight:                                     8 kg (full deployed)

Rack type:                                EIA 19”