SS-IC-20 FE1/V.35 Interface Converter

  Introduction & Characters

  SS-IC-1020 FE1/V.35 interface converter, to fulfill functions of level conversion, speed conversion and time slot extraction between FE1 interface and V.35 interface, extract specified time slot from E1 signal to compose V.35 channel of n×64kbps (n = 1 ~ 32) at discretion. It is applicable for the situation when only partial time slots available in E1 channel of the transmission device, and only V.35 interface accessible for the device with demands of transmitting data.

•         Conversion of V.35 interface into G.703 G.704 E1 interface

•         Code rate: n×64kbps (n = 1 ~ 32)

•         Clock: master/slave optional

•         E1 signal can be framed, multi-framed or unframed.

•         E1 interface impedance: 75Ω or 120Ω

•         Power supply: AC ~220V/DC -48V (optional)

  Technical Specifications

◆       E1interface specification

2M port:            G.703 and G.704 of ITU-T

Code type:       HDB3

Bit rate:         2.048Mb/s±50ppm

E1 interface:            Unbalanced               75Ω/BNC

                                        Balanced                  120Ω/RJ45

◆ V.35 interface specification

Code rate:        n×64kbps（n = 1 ~ 32）

       Clock:                         master/slave, optional

       Interface mode: V.35 / DCE

       Electrical traits:               V.35 recommended standard of ITU-T, balanced

       Terminal standard:         Acc. to ISO2593

  Working Conditions

Power supply                               Optional

Power consumption                 ≤5W

Operating temperature            -5℃ ~ 50℃

Storing temperature                 -40℃ ~ +70℃

Relative humidity                         10% ~ 90% none condensing

No corrosive and solvent Gas, no flying dust and intense magnetic-field interference

  Physical

Standalone (19″/2):

Dimensions:                            200mm (W) × 43.5mm (H) × 150mm (D)

Weight:                                     0.8 kg

Rack type:                                EIA 19”

Rack Mount (19″):

Dimensions:                            483mm (W) × 226mm (H) × 225mm (D)

Weight:                                     8 kg (full deployed)

Rack type:                                EIA 19”