SS-IC-10 E1/V.35 Interface Converter

  Introduction & Characters

   SS-TC-10 E1/V.35 Interface Converter is used to achieve conversion between G.703 and V.35 two interfaces, and its data interface mode is DCE.  

•        To convert V.35 into G.703 E1 interface

•        The rate of data interface features a 2M transparent transmission.

•         E1 Interface:  Master and Slave Clock Working Modes

•         The impedance of E1 interface can be set as 75Ω or 120Ω.

•         AC 220V or DC –48V optional for power supply.

  Technical Specifications

  E1 Port STD

2M Port:           ITU-T G.703

Code Type:        HDB3

Bit Rate:           2.048Mb/s±50ppm

E1 Interface:       Unbalanced 75Ω/BNC

                  Balanced  120Ω/RJ45

  V.35 Port STD

Bit Rate:           2.048Mb/s

Clock:             Master/Slave Clock Optional

Interface Mode:     V.35 / DCE

Electrical Property:  ITU-T V.35 Recommended STD Balance

Terminal STD:      In Compliance with ISO2593 Prescription

  Operating Environment

Input Voltage            Optional

Power Consumption      ≤5W

Operating Temperature   －5℃～50℃

Storage Temperature     －40℃～+70℃

Relative Humidity        10%～90% Non-condensed

Free from corrosive and solvent gases, flying dust, and interference of strong magnetic field.

  Structure & Dimensions

  Standalone Type （19″/2）：

Exterior Dimensions   200mm(W)×43.5mm(H)×150mm(D)

Weight              0.8 kg

Rack Type           EIA 19" Rack

  Chassis Type （19″）：

Exterior Dimensions   483mm(W)×226mm(H)×225mm(D)

Weight               8 kg (Fully Configured)

Rack Type            EIA 19" Rack